FLOTEK 360

The 360 is similar to the 250 but provides a test section of greater cross section. It can be bench top mounted, or an optional mobile stand is available.

Air is drawn through the entrance cone into the test section by a variable speed fan. A plastic honeycomb flow straightener with an L:D ratio of 10:1, ensures a laminar air flow through the test section. The entrance cone has a contraction ratio of 12:1, down to a test section measuring 6″ x 6″ x 18″ (152mm x 152mm x 457mm) long. The air velocity through the test section is variable up to 27m/s.

Learn more about the FLOTEK 360 wind tunnel.

FLOTEK 1440

The FLOTEK 1440 has become our most popular research grade wind tunnel for university engineering and technology programs. This provides a full 12″ x 12″ (300mm square) cross section in the working area over 36″ (900mm) in length. It also has a higher air velocity capacity. This extra flexibility, coupled with the excellent flow patterns obtained, make the 1440 particularly suitable for research use as well as laboratory teaching.

It is a floor standing unit, with its own integral support structure. Larger test section allows larger models with more data points.

Air is drawn through the entrance cone into the test section by a variable speed fan. A plastic honeycomb flow straightener with an L:D ratio of 10:1, assures a laminar air flow through the test section. The entrance cone has a contraction ratio of 12:1, down to a test section measuring 12″ x 12″ x 36″ (305mm x 305mm x 914mm) long. The air velocity through the test section is variable up to 132 fps (40m/s).

Learn more about the FLOTEK 1440 wind tunnel.

FLOTEK 5760

Flotek 5760-90 Wind Tunnel, 15HP AC motor- 90 MPH test section velocity.

Lesson Plans and Lab Manual. Requires 440/480 volt three phase AC power

Optional Models available for increased test section velocity.

Learn more about the FLOTEK 5760 wind tunnel.

FLOTEK 5500

Designed for Testing Student 3-D Printed wind Turbine Blades.

Round design eliminates air packing in the test section corners when testing round objects.

26.5” Round Test Section Inside Diameter.

Test Section can be mounted on Rails to allow for easy model changes.

Learn more about the FLOTEK 5500 wind tunnel.